56L LPG Tire Cylinders LPG Tire Bottle 650mm Wall Thickness Industrial Use 220mm Height

• Customization: Available
• After-sales Service: with
• Warranty: 1 Year
• Function: Storage Pressure Vessel
• Application: Gas
• Material: 37mn
• Pressure: 10.0MPa≤p<100.0MPa
• Storage Medium: Oxygen
• Pressure Level: High Pressure (10.0MPa≤p<100.0MPa)
• Condition: New
• Certificate: ISO9001
• Color: Option
• Transport Package: Nacked
• Specification: 6M3
• Trademark: FM
• Origin: Hangzhou
• HS Code: 7311009000
• Production Capacity: 500000 PCS Per Year

Product Description

The manufacturing process of LPG Tire cylinders
The material of the gas tank is steel with a thickness of about 2.5mm, and the gas tank is a kind of steel cylinder for storing gas. Because of the special use of the cylinder and the production process, the steel material is high strength steel and can meet its strength requirements.
The round sheet material is stamped out by the punch and die, and the material has been carefully calculated according to the size of the cylinder. "Gas tank" in the long-term filling, transportation, use of the process by collision, exposure, medium corrosion damage, will produce fatigue cracks, pits, deformation, corrosion and other defects, these defects are the direct cause of the explosion accident, if you encounter such a phenomenon, should be abandoned in time, after all, like this cylinder only a hundred blocks.
Preheat forming
The hardness of the material is strong, in order to reduce the internal stress of the material and reduce the yield strength of the material, it is necessary to heat the material, commonly known as hot flushing.
The hanger pulls out the preheated iron block and enters the next forming process.
The preheated material is placed on the lower die of the press by manual use of tools. The lower die has two pieces of positioning to prevent the material from being placed in the wrong position. After the material is placed, it is time to press the forming stage.
The press presses the material into bottle shape without any effort
After the first stamping is completed, the diameter of the cylinder is still relatively thick, and of course, it needs to be fine blanking, including surface smoothness, and to reach the standard size
The emulsion needs to be added during fine blanking. Benefits: 1. Cooling; 2. Prevent workpiece strain; 3. Lubrication, etc
The stamped base is prepared in advance and combined with the cylinder base by the press to ensure the quality of the bottom
The workpiece moves in a circle, the equipment at the opening continues to heat, and the spinning machine moves regularly.

NO.	liner diameter	working pressure	thickness	length	weight	quantity(pc)
40L	580mm	200bar	4.8mm	200mm	19.6kg	100